When you see the DIY work of the forum master, do you want to get a self-engraving machine? The most commonly used is the cnc engraving machine that supports MACH3 software. In addition, there are GRBL, parallel port connection and USB interface. Here are a few More popular CNC engraving machine
The CNC router is suitble for Industry, Technology Research, Advertising Design, Arts Creation, Teaching。
8060Z-2.2KW uses 6061-T5 extruded aluminum alloy, machine dimensions is 1130*890*610mm, which means you can put it on a small desktop operation, which can save a lot of space, Spindle motor is
HF water cooling spindle , 2200W , 0-24000r/min, supporting 60BYGH86-4.0A 4 independent drives.
Rotation Axis (4th Axis) center height is 60mm, Repeat positioning Accuracy is 0.03mm.
The cnc router is designed for large area engraving work such as Industrial or Hobby Prototype Building,
Building Model Making, PCB, Advertising Signs, Artwork, Crafts, Aircraft Models, RC Model parts, etc.
You can do engraving work at office or home.
The machine with CE Certificate.
iThe CNC router is suitble for Industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes.
The cnc router is designed for large area engraving work such as Industrial or Hobby Prototype Building, Building Model Making, PCB, Advertising Signs, Artwork, Crafts, Aircraft Models, RC Model parts, etc. So, you can do engraving work at office or home.
The CNC routerwith 2200W Spindle Motor,采用6061 and 6063 Hard aluminum alloy，Z-Axis Stroke is 68mm,two-phase hybrid stepping motor 57BYGH76-3A, 8 segments drive.Software Compatability Mach3/Emc2/Kcam, (Type3,Wentai, ArtCAM, coppercam)
It has two-phase hybrid stepping motor, 3A/PHASE, 150N.cm,
8 segments drive, so More Precise. And you can use the computer to observe the progress, the operation is very simple, but communication interface is Parallel port (Must use the desktop computer, Does not support laptop).
Use Mach3/Emc2/Kcam, (Type3, Wentai, ArtCAM, coppercam), support G code/.nc/.ncc/.tab/.txt, 50mm self-centering chuck
Repeat positioning Accuracy ≤0.03mm,but Acceptable material thickness ≤60mm
Engraving area 300X200mm
I think this cnc engraving machine is helpful for you to learn cnc knowledge intuitively. It can let you see the learning results intuitively. You don’t have to worry about the price of it. It is ve
ry cheap and very cost-effective.
It uses a USB port, 300W spindle motor, the maximum working range is 200*300*80mm, the maximum thickness of acceptable material is 80mm, it may be enough if used for DIY. The spindle motor is DC, 0-11000r/min, repeat positioning accuracy reaches 0.03mm, support
Win-XP / Win 7 32 bit or 64 bit operating system, can be directly imported into G code/.nc/.ncc/.tab/.txt using Mach3/Emc2/Kcam, (Type3, Wentai, ArtCAM, coppercam) software.
This cnc engraving machine is suitable for – advertising and designers – PCB engineers – wooden fans – model fans – but NOT Ready for Nowise (beginner) its system matches windows xp/7/8/10, including 1 year machine Part and 6 months electrical parts, stepping motor, spindle Free Warranty.
USB port connection makes it easy to use, directly connect notebook and desktop computer, no patch cord, 400W DC spindle, with 0-12000r/min speed, meet your requirements. The driver is 57HS56, compatible with Mach3 / Emc2 / Kcam, (Type3, Wentai, ArtCAM, coppercam), directly into the G code / .nc / .ncc / .tab / .txt, the center height of the rotating shaft is 51mm, the maximum turning is directly less than 81mm Is your DIY good helper
This is a REAL 5-axis machine that synchronizes 5-axis motion and you can watch our videos.
For an engineer, it is your best choice, the operation of the mach3 software is very simple. Support g code, nc, ncc, txt, tap etc.
You can use 3 axes, 4 axes, or 5 axes, because each axis is a separate driver, and now it is an upgraded version with automatic check function, Aluminum base sheet is heavy which can make sure less vibration when work. The operation will be more stable and efficient, Built in frequencey converter and without controller box.
It also has a high precision of 0.05mm, which is a Cross slippery platform design rather than gantry design.
Especially with 1500/2200w water-cooled spindle. Don’t worry about the cooling process of engraving metal.
You can buy this machine from us without any worry because:
English manual available.
Mach 3 software send with the machine as a CD.
Can engrave material which hardness below 45.
From reliable & trustable profesional China CNC Router manufacturer